Famco Chimney Cap & Crown Nationwide

Famco Chimney Cap & Crown in Lansdale: What to Know First

We provide independent Famco chimney cap and crown service in Lansdale, typically scheduling within a week and completing most cap replacements and crown repairs in a single visit. Every job starts with a written price before work begins, backed by our 365-Day Done Right Promise. This page is for homeowners who already know they have Famco hardware on their chimney and want to understand what failing looks like, what fixing it costs, and who to call without sitting through a sales pitch. If you’re seeing rust streaks, water spots on the firebox ceiling, or a cap that’s shifted after a windy March in Lansdale, call us at (267) 327-4785. We’ll send a written estimate, not a technician with a clipboard and a hunch.

Call (267) 327-4785

How Famco Products Fail - and How We Fix Them

• Galvanized-steel cap series (GC line) - rust-through at the seams. The GC caps use a lower-gauge galvanized shell that holds up fine in dry climates but degrades faster in Montgomery County’s freeze-thaw cycles. We see rust perforation start at the corner welds around year 7, not from the top down but from the inside out where condensation collects. Our fix: pull the cap, inspect the flue mouth for spalling, and install a 304 stainless replacement through our Haven buying network, with a written warranty on both material and labor.
• Multi-flue cap series (MFC line) - lid separation from the skirt. The MFC lids are spot-welded to a perimeter rail, and the thermal expansion from Lansdale’s shoulder-season temperature swings works those welds loose. You’ll hear it before you see it: a rattle in high wind that gets worse after October. We reseat with mechanical fasteners and high-temp sealant, or replace with a one-piece design if the rail is warped. The camera goes down first to confirm no debris from the loose lid has entered the flue.
• Crown-mounted cap adapters - galvanic corrosion at the base. Famco’s adapter rings for masonry crowns are galvanized steel seated on concrete. When the crown seal fails and water gets between the two, the ring corrodes and expands, cracking the crown further. We cut the adapter, assess the crown integrity with a hammer test, and either coat with HeatShield CrownCoat or pour a new crown section if the structural rebar is exposed.
• Chimney crown - hairline cracking from Famco cap overhang mismatch. Some Famco cap sizes extend past the crown edge by design, directing runoff onto the crown surface instead of past it. In Lansdale, that runoff carries road salt aerosol from winter air. The result is accelerated surface erosion we call “salt spalling,” visible as a white dust ring on the crown. We trim or replace with proper-overhang caps and apply a silane-based crown sealer, documenting before and after under Haven Standard Clause 4.
• Draft-induced downdraft caps (DWD series) - baffle seizure. The DWD’s wind-directional baffle runs on a brass bushing that seizes when creosote glaze builds up, common in Lansdale’s older colonials near the Merrick Road corridor where homeowners burn seasoned hardwood but run short, hot fires. A seized baffle defaults to the wrong position and can reverse draft. We free or replace the bushing, never the whole assembly if the hood is sound, and show the homeowner the creosote class on camera so they understand why it happened.

Our Famco Chimney Cap & Crown Process

1. 1
   Call and schedule. A live person answers, confirms your Famco model if you know it, and books a Level 2 inspection with camera scan. Corrine Halstead’s crew has worked Famco hardware across Lansdale since 2009.
2. 2
   Arrive and inspect. Background-checked, uniformed technician, license number visible, text when en route. NFPA 211 Level 2 inspection: camera down the flue, ladder to the crown, photo record of every surface. The camera doesn’t guess. Neither do we.
3. 3
   Diagnose and quote. We name what we found, what it costs, and what happens if you wait. Written price, written scope, written warranty - Haven Standard Clause 1. No verbal estimates, no “we’ll see when we start.”
4. 4
   Source parts. Famco OEM when available and appropriate; quality aftermarket from Gelco or Olympia Chimney when the OEM part is discontinued or the design is improved. We explain the choice, not assume you don’t care.
5. 5
   Execute and document. Cap or crown work completed, chimney swept if needed, camera re-run to confirm clear flue and proper draft. Photo record uploaded, accessible to you, stored per Haven Standard Clause 4.
6. 6
   Close with warranty. 365-Day Done Right Promise stamped on the invoice. Free Second Opinion always available if another company quoted differently.

Before

After

What Famco Chimney Cap & Crown Costs in Lansdale

Most Famco cap replacements in Lansdale run $280-$520 installed, depending on flue count and whether the flue tile needs repair before the new cap seats. Crown coating with HeatShield CrownCoat, when the crown is structurally sound, is typically $450-$680. Partial crown rebuilds start around $890 and scale with chimney width and scaffold needs.

What moves the price: accessibility (steep roof pitch or limited setback from the neighbor), flue tile spalling requiring resurfacing before cap installation, and whether we’re matching a multi-flue cap to non-standard flue spacing common in 1960s Lansdale split-levels. We don’t know until we look, which is why the camera scan is included, not extra.

Every estimate is free, written, and delivered before any work starts. Call (267) 327-4785 for an exact quote on your Famco setup.

Why Lansdale Homeowners Call Level Two Chimney Lansdale for Famco Work

We’ve inspected and cleaned more than 38,000 chimneys since 2009, every one with a written price first and a photo record after. Corrine Halstead’s crew knows Famco hardware specifically - the model lines, the failure patterns, the parts availability gaps - and carries backup inventory from DuraFlex, HeatShield, and Gelco so you’re not waiting on a back-ordered OEM ring while water enters your flue. Our technicians are background-checked, uniformed, and named on your appointment; you get a text when they’re on the way, not a four-hour window and an apology. The Haven Standard was built on this: have it in writing, verify the crew, document the work, and make it right if it’s not. That’s Clause 1 through 4, and it’s been our practice since before it had a name.

FAQs